Compare any two graphics cards:
Radeon HD 3470 256MB vs Radeon HD 6770
IntroThe Radeon HD 3470 256MB uses a 55 nm design. AMD has set the core frequency at 800 MHz. The DDR2 memory runs at a frequency of 950 MHz on this specific model. It features 40(8x5) SPUs along with 4 TAUs and 4 Rasterization Operator Units.Compare that to the Radeon HD 6770, which comes with GPU core speed of 900 MHz, and 512 MB of GDDR5 RAM running at 1050 MHz through a 128-bit bus. It also features 800 SPUs, 40 Texture Address Units, and 16 Raster Operation Units.
Display Graphs
Power Usage and Theoretical BenchmarksMemory BandwidthTheoretically speaking, the Radeon HD 6770 will be 121% quicker than the Radeon HD 3470 256MB in general, because of its higher bandwidth. (explain)
Texel RateThe Radeon HD 6770 will be quite a bit (about 1025%) more effective at AF than the Radeon HD 3470 256MB. (explain)
Pixel RateThe Radeon HD 6770 will be much (approximately 350%) faster with regards to FSAA than the Radeon HD 3470 256MB, and also should be able to handle higher resolutions more effectively. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Memory bandwidth is the largest amount of data (counted in megabytes per second) that can be transferred past the external memory interface in a second. The number is calculated by multiplying the card's bus width by its memory speed. If it uses DDR RAM, it must be multiplied by 2 again. If DDR5, multiply by 4 instead. The higher the bandwidth is, the better the card will be in general. It especially helps with anti-aliasing, High Dynamic Range and higher screen resolutions. Texel Rate: Texel rate is the maximum amount of texture map elements (texels) that are processed per second. This figure is calculated by multiplying the total texture units of the card by the core speed of the chip. The better the texel rate, the better the card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels processed per second. Pixel Rate: Pixel rate is the maximum number of pixels that the graphics card can possibly write to the local memory per second - measured in millions of pixels per second. The figure is calculated by multiplying the number of Raster Operations Pipelines by the clock speed of the card. ROPs (Raster Operations Pipelines - aka Render Output Units) are responsible for filling the screen with pixels (the image). The actual pixel output rate is also dependant on lots of other factors, most notably the memory bandwidth of the card - the lower the memory bandwidth is, the lower the potential to reach the max fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!