Compare any two graphics cards:
Radeon HD 7770 vs Radeon R7 250X 2GB
IntroThe Radeon HD 7770 features a core clock speed of 1000 MHz and a GDDR5 memory frequency of 1125 MHz. It also uses a 128-bit bus, and uses a 28 nm design. It is comprised of 640 SPUs, 40 TAUs, and 16 Raster Operation Units.Compare all that to the Radeon R7 250X 2GB, which uses a 28 nm design. AMD has clocked the core speed at 1000 MHz. The GDDR5 memory runs at a speed of 1125 MHz on this particular model. It features 640 SPUs as well as 40 TAUs and 16 ROPs.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthBoth cards have the exact same bandwidth, so in theory they should perform the same. (explain)
Texel RateBoth cards have the exact same texel fill rate, so in theory they should be equally good at at anisotropic filtering. (explain)Pixel RateBoth cards have the exact same pixel rate, so theoretically they should perform equally good at at AA, and be capable of handling the same resolutions. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Memory bandwidth is the largest amount of information (counted in megabytes per second) that can be transferred over the external memory interface in a second. It is calculated by multiplying the card's interface width by its memory speed. In the case of DDR RAM, it must be multiplied by 2 once again. If it uses DDR5, multiply by 4 instead. The higher the bandwidth is, the better the card will be in general. It especially helps with AA, High Dynamic Range and higher screen resolutions. Texel Rate: Texel rate is the maximum number of texture map elements (texels) that can be applied in one second. This is calculated by multiplying the total texture units of the card by the core clock speed of the chip. The better the texel rate, the better the graphics card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels applied in a second. Pixel Rate: Pixel rate is the maximum number of pixels the graphics card can possibly write to its local memory in a second - measured in millions of pixels per second. Pixel rate is calculated by multiplying the amount of Render Output Units by the the core speed of the card. ROPs (Raster Operations Pipelines - sometimes also referred to as Render Output Units) are responsible for drawing the pixels (image) on the screen. The actual pixel fill rate is also dependant on quite a few other factors, especially the memory bandwidth - the lower the memory bandwidth is, the lower the ability to reach the max fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
2 Responses to “Radeon HD 7770 vs Radeon R7 250X 2GB”^So.....................?
cuanto de fuente de energia necesita cada una