Compare any two graphics cards:
Radeon RX 460 2GB vs Radeon RX 5600 XT
IntroThe Radeon RX 460 2GB comes with core clock speeds of 1090 MHz on the GPU, and 1750 MHz on the 2048 MB of GDDR5 RAM. It features 896 SPUs as well as 56 TAUs and 16 Rasterization Operator Units.Compare those specs to the Radeon RX 5600 XT, which uses a 7 nm design. AMD has clocked the core speed at 1375 MHz. The GDDR6 RAM runs at a speed of 1500 MHz on this particular card. It features 2304 SPUs as well as 144 TAUs and 64 Rasterization Operator Units.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthAs far as performance goes, the Radeon RX 5600 XT should in theory be a lot better than the Radeon RX 460 2GB in general. (explain)
Texel RateThe Radeon RX 5600 XT is a lot (approximately 224%) faster with regards to AF than the Radeon RX 460 2GB. (explain)
Pixel RateIf running with high levels of AA is important to you, then the Radeon RX 5600 XT is superior to the Radeon RX 460 2GB, and very much so. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Bandwidth is the largest amount of data (counted in megabytes per second) that can be transported over the external memory interface in one second. The number is calculated by multiplying the card's interface width by its memory speed. In the case of DDR RAM, the result should be multiplied by 2 again. If DDR5, multiply by ANOTHER 2x. The higher the bandwidth is, the faster the card will be in general. It especially helps with anti-aliasing, High Dynamic Range and higher screen resolutions. Texel Rate: Texel rate is the maximum number of texture map elements (texels) that are applied in one second. This number is calculated by multiplying the total texture units of the card by the core speed of the chip. The better the texel rate, the better the video card will be at texture filtering (anisotropic filtering - AF). It is measured in millions of texels applied per second. Pixel Rate: Pixel rate is the maximum number of pixels the graphics card could possibly write to its local memory per second - measured in millions of pixels per second. The figure is worked out by multiplying the number of colour ROPs by the the core speed of the card. ROPs (Raster Operations Pipelines - also called Render Output Units) are responsible for drawing the pixels (image) on the screen. The actual pixel rate is also dependant on many other factors, most notably the memory bandwidth - the lower the memory bandwidth is, the lower the ability to get to the maximum fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!