Radeon HD 5750 512MB vs Radeon HD 6950

Intro

Compare all that to the Radeon HD 6950, which uses a 40 nm design. AMD has clocked the core frequency at 800 MHz. The GDDR5 RAM is set to run at a frequency of 1250 MHz on this particular model. It features 1408 SPUs as well as 88 TAUs and 32 ROPs.

Display Graphs

Hide Graphs

Power Usage and Theoretical Benchmarks

Power Consumption (Max TDP)

Radeon HD 5750 512MB		86 Watts
Radeon HD 6950		200 Watts
	Difference: 114 Watts (133%)

Memory Bandwidth

As far as performance goes, the Radeon HD 6950 should theoretically be much better than the Radeon HD 5750 512MB in general. (explain)

Radeon HD 6950		160000 MB/sec
Radeon HD 5750 512MB		73600 MB/sec
	Difference: 86400 (117%)

Texel Rate

The Radeon HD 6950 is a lot (more or less 179%) more effective at AF than the Radeon HD 5750 512MB. (explain)

Radeon HD 6950		70400 Mtexels/sec
Radeon HD 5750 512MB		25200 Mtexels/sec
	Difference: 45200 (179%)

Pixel Rate

If running with high levels of AA is important to you, then the Radeon HD 6950 is the winner, by a large margin. (explain)

Radeon HD 6950		25600 Mpixels/sec
Radeon HD 5750 512MB		11200 Mpixels/sec
	Difference: 14400 (129%)

Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit.

Price Comparison

Specifications

Memory Bandwidth: Memory bandwidth is the maximum amount of information (in units of megabytes per second) that can be transferred over the external memory interface in one second. The number is worked out by multiplying the card's interface width by its memory speed. If it uses DDR type RAM, the result should be multiplied by 2 once again. If DDR5, multiply by ANOTHER 2x. The higher the bandwidth is, the better the card will be in general. It especially helps with AA, High Dynamic Range and higher screen resolutions.

Texel Rate: Texel rate is the maximum texture map elements (texels) that are applied per second. This is worked out by multiplying the total texture units of the card by the core speed of the chip. The higher the texel rate, the better the card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels processed in one second.

Pixel Rate: Pixel rate is the maximum amount of pixels that the graphics card could possibly record to the local memory per second - measured in millions of pixels per second. The number is calculated by multiplying the number of colour ROPs by the the card's clock speed. ROPs (Raster Operations Pipelines - also sometimes called Render Output Units) are responsible for drawing the pixels (image) on the screen. The actual pixel output rate is also dependant on quite a few other factors, especially the memory bandwidth of the card - the lower the memory bandwidth is, the lower the ability to get to the maximum fill rate.