Radeon HD 3850 X2 vs Radeon R7 250X 2GB

Intro

Compare those specifications to the Radeon R7 250X 2GB, which has a core clock speed of 1000 MHz and a GDDR5 memory speed of 1125 MHz. It also makes use of a 128-bit bus, and uses a 28 nm design. It is made up of 640 SPUs, 40 TAUs, and 16 Raster Operation Units.

Display Graphs

Hide Graphs

Power Usage and Theoretical Benchmarks

Memory Bandwidth

The Radeon HD 3850 X2 should theoretically perform quite a bit faster than the Radeon R7 250X 2GB overall. (explain)

Radeon HD 3850 X2		105984 MB/sec
Radeon R7 250X 2GB		72000 MB/sec
	Difference: 33984 (47%)

Texel Rate

The Radeon R7 250X 2GB will be a lot (approximately 87%) more effective at AF than the Radeon HD 3850 X2. (explain)

Radeon R7 250X 2GB		40000 Mtexels/sec
Radeon HD 3850 X2		21376 Mtexels/sec
	Difference: 18624 (87%)

Pixel Rate

If using high levels of AA is important to you, then the Radeon HD 3850 X2 is the winner, and very much so. (explain)

Radeon HD 3850 X2		21376 Mpixels/sec
Radeon R7 250X 2GB		16000 Mpixels/sec
	Difference: 5376 (34%)

Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit.

One or more cards in this comparison are multi-core. This means that their bandwidth, texel and pixel rates are theoretically doubled - this does not mean the card will actually perform twice as fast, but only that it should in theory be able to. Actual game benchmarks will give a more accurate idea of what it's capable of.

Price Comparison

Specifications

Memory Bandwidth: Bandwidth is the max amount of information (in units of MB per second) that can be transported across the external memory interface in one second. The number is calculated by multiplying the bus width by its memory speed. In the case of DDR memory, it must be multiplied by 2 again. If DDR5, multiply by 4 instead. The higher the memory bandwidth, the faster the card will be in general. It especially helps with anti-aliasing, High Dynamic Range and higher screen resolutions.

Texel Rate: Texel rate is the maximum amount of texture map elements (texels) that can be processed per second. This is calculated by multiplying the total texture units of the card by the core speed of the chip. The higher the texel rate, the better the card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels processed per second.

Pixel Rate: Pixel rate is the maximum number of pixels the graphics card could possibly record to its local memory per second - measured in millions of pixels per second. Pixel rate is worked out by multiplying the amount of Raster Operations Pipelines by the the card's clock speed. ROPs (Raster Operations Pipelines - aka Render Output Units) are responsible for outputting the pixels (image) to the screen. The actual pixel rate also depends on quite a few other factors, especially the memory bandwidth - the lower the bandwidth is, the lower the potential to get to the maximum fill rate.