GeForce GTX 460 2GB vs Radeon R7 250X 2GB

Intro

Compare those specifications to the Radeon R7 250X 2GB, which comes with clock speeds of 1000 MHz on the GPU, and 1125 MHz on the 2048 MB of GDDR5 memory. It features 640 SPUs along with 40 Texture Address Units and 16 ROPs.

Display Graphs

Hide Graphs

Power Usage and Theoretical Benchmarks

Power Consumption (Max TDP)

Radeon R7 250X 2GB		95 Watts
GeForce GTX 460 2GB		160 Watts
	Difference: 65 Watts (68%)

Memory Bandwidth

The GeForce GTX 460 2GB, in theory, should perform much faster than the Radeon R7 250X 2GB overall. (explain)

GeForce GTX 460 2GB		115200 MB/sec
Radeon R7 250X 2GB		72000 MB/sec
	Difference: 43200 (60%)

Texel Rate

The Radeon R7 250X 2GB is just a bit (about 6%) better at AF than the GeForce GTX 460 2GB. (explain)

Radeon R7 250X 2GB		40000 Mtexels/sec
GeForce GTX 460 2GB		37800 Mtexels/sec
	Difference: 2200 (6%)

Pixel Rate

If using high levels of AA is important to you, then the GeForce GTX 460 2GB is the winner, by a large margin. (explain)

GeForce GTX 460 2GB		21600 Mpixels/sec
Radeon R7 250X 2GB		16000 Mpixels/sec
	Difference: 5600 (35%)

Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit.

Price Comparison

Specifications

Memory Bandwidth: Memory bandwidth is the max amount of data (measured in MB per second) that can be transported past the external memory interface within a second. It is calculated by multiplying the bus width by the speed of its memory. In the case of DDR type memory, the result should be multiplied by 2 again. If it uses DDR5, multiply by 4 instead. The higher the bandwidth is, the faster the card will be in general. It especially helps with anti-aliasing, HDR and high resolutions.

Texel Rate: Texel rate is the maximum texture map elements (texels) that are processed per second. This number is calculated by multiplying the total number of texture units by the core clock speed of the chip. The better the texel rate, the better the card will be at texture filtering (anisotropic filtering - AF). It is measured in millions of texels processed per second.

Pixel Rate: Pixel rate is the most pixels that the graphics chip could possibly write to the local memory in a second - measured in millions of pixels per second. Pixel rate is worked out by multiplying the amount of ROPs by the the core clock speed. ROPs (Raster Operations Pipelines - sometimes also referred to as Render Output Units) are responsible for filling the screen with pixels (the image). The actual pixel output rate also depends on lots of other factors, especially the memory bandwidth of the card - the lower the memory bandwidth is, the lower the ability to get to the maximum fill rate.