Radeon HD 6450 (OEM) 1GB vs Radeon R7 250X 2GB

Intro

Compare those specifications to the Radeon R7 250X 2GB, which has GPU core speed of 1000 MHz, and 2048 MB of GDDR5 memory set to run at 1125 MHz through a 128-bit bus. It also features 640 Stream Processors, 40 Texture Address Units, and 16 Raster Operation Units.

Display Graphs

Hide Graphs

Power Usage and Theoretical Benchmarks

Power Consumption (Max TDP)

Radeon HD 6450 (OEM) 1GB		31 Watts
Radeon R7 250X 2GB		95 Watts
	Difference: 64 Watts (206%)

Memory Bandwidth

As far as performance goes, the Radeon R7 250X 2GB should in theory be quite a bit better than the Radeon HD 6450 (OEM) 1GB overall. (explain)

Radeon R7 250X 2GB		72000 MB/sec
Radeon HD 6450 (OEM) 1GB		28800 MB/sec
	Difference: 43200 (150%)

Texel Rate

The Radeon R7 250X 2GB is quite a bit (more or less 567%) faster with regards to AF than the Radeon HD 6450 (OEM) 1GB. (explain)

Radeon R7 250X 2GB		40000 Mtexels/sec
Radeon HD 6450 (OEM) 1GB		6000 Mtexels/sec
	Difference: 34000 (567%)

Pixel Rate

The Radeon R7 250X 2GB will be quite a bit (about 433%) more effective at full screen anti-aliasing than the Radeon HD 6450 (OEM) 1GB, and should be capable of handling higher resolutions without slowing down too much. (explain)

Radeon R7 250X 2GB		16000 Mpixels/sec
Radeon HD 6450 (OEM) 1GB		3000 Mpixels/sec
	Difference: 13000 (433%)

Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit.

Price Comparison

Specifications

Memory Bandwidth: Memory bandwidth is the max amount of information (counted in megabytes per second) that can be moved across the external memory interface in one second. It is worked out by multiplying the interface width by its memory clock speed. In the case of DDR memory, the result should be multiplied by 2 again. If it uses DDR5, multiply by 4 instead. The better the card's memory bandwidth, the faster the card will be in general. It especially helps with AA, High Dynamic Range and high resolutions.

Texel Rate: Texel rate is the maximum amount of texture map elements (texels) that are processed in one second. This is worked out by multiplying the total number of texture units of the card by the core speed of the chip. The higher this number, the better the card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels processed in one second.

Pixel Rate: Pixel rate is the most pixels that the graphics card can possibly record to the local memory in a second - measured in millions of pixels per second. Pixel rate is worked out by multiplying the amount of colour ROPs by the clock speed of the card. ROPs (Raster Operations Pipelines - also sometimes called Render Output Units) are responsible for filling the screen with pixels (the image). The actual pixel output rate also depends on quite a few other factors, especially the memory bandwidth - the lower the memory bandwidth is, the lower the ability to get to the maximum fill rate.