Radeon HD 6750 1GB vs Radeon HD 7850

Intro

Compare those specs to the Radeon HD 7850, which makes use of a 28 nm design. AMD has set the core frequency at 860 MHz. The GDDR5 memory runs at a frequency of 1200 MHz on this specific card. It features 1024 SPUs along with 64 Texture Address Units and 32 Rasterization Operator Units.

Display Graphs

Hide Graphs

Power Usage and Theoretical Benchmarks

Power Consumption (Max TDP)

Radeon HD 6750 1GB		86 Watts
Radeon HD 7850		130 Watts
	Difference: 44 Watts (51%)

Memory Bandwidth

The Radeon HD 7850, in theory, should perform a lot faster than the Radeon HD 6750 1GB overall. (explain)

Radeon HD 7850		153600 MB/sec
Radeon HD 6750 1GB		64000 MB/sec
	Difference: 89600 (140%)

Texel Rate

The Radeon HD 7850 is much (more or less 111%) faster with regards to texture filtering than the Radeon HD 6750 1GB. (explain)

Radeon HD 7850		55040 Mtexels/sec
Radeon HD 6750 1GB		26100 Mtexels/sec
	Difference: 28940 (111%)

Pixel Rate

If running with high levels of AA is important to you, then the Radeon HD 7850 is a better choice, and very much so. (explain)

Radeon HD 7850		27520 Mpixels/sec
Radeon HD 6750 1GB		11600 Mpixels/sec
	Difference: 15920 (137%)

Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit.

Price Comparison

Specifications

Memory Bandwidth: Memory bandwidth is the largest amount of data (measured in MB per second) that can be transferred across the external memory interface within a second. The number is calculated by multiplying the bus width by the speed of its memory. If it uses DDR RAM, the result should be multiplied by 2 again. If it uses DDR5, multiply by 4 instead. The better the bandwidth is, the better the card will be in general. It especially helps with AA, HDR and higher screen resolutions.

Texel Rate: Texel rate is the maximum amount of texture map elements (texels) that are applied per second. This number is calculated by multiplying the total amount of texture units by the core speed of the chip. The better this number, the better the graphics card will be at texture filtering (anisotropic filtering - AF). It is measured in millions of texels processed in one second.

Pixel Rate: Pixel rate is the maximum number of pixels that the graphics chip could possibly record to its local memory per second - measured in millions of pixels per second. The figure is calculated by multiplying the amount of colour ROPs by the clock speed of the card. ROPs (Raster Operations Pipelines - also sometimes called Render Output Units) are responsible for filling the screen with pixels (the image). The actual pixel output rate is also dependant on many other factors, especially the memory bandwidth of the card - the lower the memory bandwidth is, the lower the potential to get to the max fill rate.