Compare any two graphics cards:
Radeon HD 5750 1GB vs Radeon HD 6450 (OEM) 1GB
IntroThe Radeon HD 5750 1GB features a core clock frequency of 700 MHz and a GDDR5 memory speed of 1150 MHz. It also makes use of a 128-bit bus, and makes use of a 40 nm design. It is made up of 720(144x5) SPUs, 36 TAUs, and 16 ROPs.Compare those specs to the Radeon HD 6450 (OEM) 1GB, which has GPU core speed of 750 MHz, and 1024 MB of GDDR5 RAM set to run at 900 MHz through a 64-bit bus. It also is made up of 160 Stream Processors, 8 Texture Address Units, and 4 ROPs.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthThe Radeon HD 5750 1GB should theoretically be much faster than the Radeon HD 6450 (OEM) 1GB overall. (explain)
Texel RateThe Radeon HD 5750 1GB will be much (about 320%) more effective at texture filtering than the Radeon HD 6450 (OEM) 1GB. (explain)
Pixel RateThe Radeon HD 5750 1GB is a lot (about 273%) better at full screen anti-aliasing than the Radeon HD 6450 (OEM) 1GB, and should be capable of handling higher resolutions more effectively. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Bandwidth is the maximum amount of information (measured in MB per second) that can be moved over the external memory interface within a second. It is calculated by multiplying the bus width by the speed of its memory. If it uses DDR type RAM, it must be multiplied by 2 again. If it uses DDR5, multiply by 4 instead. The higher the bandwidth is, the better the card will be in general. It especially helps with AA, High Dynamic Range and high resolutions. Texel Rate: Texel rate is the maximum texture map elements (texels) that are applied per second. This is calculated by multiplying the total texture units of the card by the core speed of the chip. The higher the texel rate, the better the card will be at texture filtering (anisotropic filtering - AF). It is measured in millions of texels in one second. Pixel Rate: Pixel rate is the maximum number of pixels that the graphics card could possibly write to its local memory per second - measured in millions of pixels per second. The number is calculated by multiplying the number of colour ROPs by the clock speed of the card. ROPs (Raster Operations Pipelines - sometimes also referred to as Render Output Units) are responsible for filling the screen with pixels (the image). The actual pixel output rate also depends on many other factors, most notably the memory bandwidth - the lower the memory bandwidth is, the lower the potential to reach the max fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!