Compare any two graphics cards:
Radeon HD 4850 512MB vs Radeon RX 460
IntroThe Radeon HD 4850 512MB features clock speeds of 625 MHz on the GPU, and 993 MHz on the 512 MB of GDDR3 RAM. It features 800(160x5) SPUs along with 40 Texture Address Units and 16 Rasterization Operator Units.Compare those specs to the Radeon RX 460, which makes use of a 14 nm design. AMD has set the core speed at 1090 MHz. The GDDR5 RAM runs at a frequency of 1750 MHz on this model. It features 896 SPUs along with 56 TAUs and 16 Rasterization Operator Units.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthIn theory, the Radeon RX 460 should perform quite a bit faster than the Radeon HD 4850 512MB overall. (explain)
Texel RateThe Radeon RX 460 will be quite a bit (more or less 144%) better at texture filtering than the Radeon HD 4850 512MB. (explain)
Pixel RateIf running with a high resolution is important to you, then the Radeon RX 460 is a better choice, by far. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Memory bandwidth is the largest amount of data (counted in MB per second) that can be transferred over the external memory interface in one second. It's worked out by multiplying the card's bus width by its memory clock speed. If the card has DDR type RAM, it should be multiplied by 2 once again. If DDR5, multiply by ANOTHER 2x. The better the memory bandwidth, the faster the card will be in general. It especially helps with anti-aliasing, High Dynamic Range and high resolutions. Texel Rate: Texel rate is the maximum number of texture map elements (texels) that can be applied per second. This figure is calculated by multiplying the total amount of texture units by the core speed of the chip. The better the texel rate, the better the card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels applied per second. Pixel Rate: Pixel rate is the maximum amount of pixels that the graphics card can possibly record to the local memory in a second - measured in millions of pixels per second. The number is calculated by multiplying the amount of Raster Operations Pipelines by the the core clock speed. ROPs (Raster Operations Pipelines - aka Render Output Units) are responsible for filling the screen with pixels (the image). The actual pixel output rate is also dependant on many other factors, most notably the memory bandwidth - the lower the memory bandwidth is, the lower the ability to get to the max fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!