Compare any two graphics cards:
GeForce 8800 GT 512MB vs GeForce GTX 750
IntroThe GeForce 8800 GT 512MB has a GPU clock speed of 600 MHz, and the 512 MB of GDDR3 memory is set to run at 900 MHz through a 256-bit bus. It also is made up of 112 SPUs, 56 TAUs, and 16 Raster Operation Units.Compare those specifications to the GeForce GTX 750, which makes use of a 28 nm design. nVidia has clocked the core frequency at 1020 MHz. The GDDR5 memory is set to run at a speed of 1250 MHz on this model. It features 512 SPUs along with 32 TAUs and 16 Rasterization Operator Units.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthIn theory, the GeForce GTX 750 should perform much faster than the GeForce 8800 GT 512MB in general. (explain)
Texel RateThe GeForce 8800 GT 512MB is a small bit (more or less 3%) faster with regards to anisotropic filtering than the GeForce GTX 750. (explain)
Pixel RateThe GeForce GTX 750 is a lot (about 70%) more effective at FSAA than the GeForce 8800 GT 512MB, and able to handle higher screen resolutions more effectively. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Bandwidth is the largest amount of data (measured in MB per second) that can be transferred past the external memory interface in one second. It's worked out by multiplying the bus width by its memory clock speed. If it uses DDR type RAM, it must be multiplied by 2 once again. If it uses DDR5, multiply by 4 instead. The higher the memory bandwidth, the better the card will be in general. It especially helps with anti-aliasing, HDR and high resolutions. Texel Rate: Texel rate is the maximum amount of texture map elements (texels) that are processed in one second. This figure is worked out by multiplying the total texture units of the card by the core speed of the chip. The higher this number, the better the video card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels in one second. Pixel Rate: Pixel rate is the maximum amount of pixels the graphics card could possibly write to its local memory per second - measured in millions of pixels per second. The figure is calculated by multiplying the number of Raster Operations Pipelines by the the card's clock speed. ROPs (Raster Operations Pipelines - also called Render Output Units) are responsible for drawing the pixels (image) on the screen. The actual pixel output rate is also dependant on quite a few other factors, most notably the memory bandwidth of the card - the lower the memory bandwidth is, the lower the potential to get to the maximum fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!