Compare any two graphics cards:
Radeon HD 4870 512MB vs Radeon HD 5830
IntroThe Radeon HD 4870 512MB makes use of a 55 nm design. AMD has clocked the core frequency at 750 MHz. The GDDR5 RAM is set to run at a speed of 900 MHz on this particular card. It features 800(160x5) SPUs as well as 40 TAUs and 16 ROPs.Compare those specs to the Radeon HD 5830, which comes with clock speeds of 800 MHz on the GPU, and 1000 MHz on the 1024 MB of GDDR5 memory. It features 1120(224x5) SPUs as well as 56 TAUs and 16 Rasterization Operator Units.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthThe Radeon HD 5830 should in theory perform a little bit faster than the Radeon HD 4870 512MB in general. (explain)
Texel RateThe Radeon HD 5830 is quite a bit (about 49%) better at anisotropic filtering than the Radeon HD 4870 512MB. (explain)
Pixel RateThe Radeon HD 5830 should be a little bit (about 7%) more effective at FSAA than the Radeon HD 4870 512MB, and should be capable of handling higher resolutions better. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Bandwidth is the maximum amount of data (in units of megabytes per second) that can be transferred across the external memory interface in a second. The number is calculated by multiplying the bus width by its memory clock speed. If it uses DDR RAM, it must be multiplied by 2 again. If DDR5, multiply by 4 instead. The higher the memory bandwidth, the better the card will be in general. It especially helps with anti-aliasing, HDR and higher screen resolutions. Texel Rate: Texel rate is the maximum number of texture map elements (texels) that are applied per second. This is calculated by multiplying the total texture units by the core clock speed of the chip. The higher this number, the better the card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels in one second. Pixel Rate: Pixel rate is the maximum number of pixels that the graphics chip can possibly record to its local memory in a second - measured in millions of pixels per second. The figure is calculated by multiplying the amount of Raster Operations Pipelines by the the core speed of the card. ROPs (Raster Operations Pipelines - aka Render Output Units) are responsible for filling the screen with pixels (the image). The actual pixel fill rate also depends on lots of other factors, most notably the memory bandwidth - the lower the bandwidth is, the lower the ability to get to the maximum fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
2 Responses to “Radeon HD 4870 512MB vs Radeon HD 5830”geforce 315
[...] Radeon HD 4870 512MB vs Radeon HD 5830 – Performance …Jun 8, 2011 … Compare all that to the Radeon HD 5830, which features GPU clock speed of 800 MHz, and 1024 MB of GDDR5 RAM set to run at 1000 MHz … [...]