Compare any two graphics cards:
GeForce 9800 GT 1GB vs GeForce 9800 GX2
IntroThe GeForce 9800 GT 1GB uses a 65/55 nm design. nVidia has set the core frequency at 600 MHz. The GDDR3 RAM is set to run at a frequency of 900 MHz on this particular card. It features 112 SPUs along with 56 TAUs and 16 Rasterization Operator Units.Compare all that to the GeForce 9800 GX2, which features core speeds of 600 MHz on the GPU, and 1000 MHz on the 512 MB of GDDR3 memory. It features 128 SPUs as well as 64 TAUs and 16 Rasterization Operator Units.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthPerformance-wise, the GeForce 9800 GX2 should theoretically be quite a bit superior to the GeForce 9800 GT 1GB in general. (explain)
Texel RateThe GeForce 9800 GX2 will be much (approximately 129%) faster with regards to anisotropic filtering than the GeForce 9800 GT 1GB. (explain)
Pixel RateIf using a high resolution is important to you, then the GeForce 9800 GX2 is a better choice, and very much so. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. One or more cards in this comparison are multi-core. This means that their bandwidth, texel and pixel rates are theoretically doubled - this does not mean the card will actually perform twice as fast, but only that it should in theory be able to. Actual game benchmarks will give a more accurate idea of what it's capable of. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Bandwidth is the max amount of data (counted in megabytes per second) that can be transported over the external memory interface in a second. The number is worked out by multiplying the interface width by the speed of its memory. If it uses DDR type memory, it must be multiplied by 2 again. If it uses DDR5, multiply by 4 instead. The higher the memory bandwidth, the faster the card will be in general. It especially helps with anti-aliasing, HDR and high resolutions. Texel Rate: Texel rate is the maximum amount of texture map elements (texels) that can be applied in one second. This figure is calculated by multiplying the total number of texture units of the card by the core speed of the chip. The better this number, the better the card will be at texture filtering (anisotropic filtering - AF). It is measured in millions of texels applied per second. Pixel Rate: Pixel rate is the maximum number of pixels that the graphics card can possibly record to its local memory per second - measured in millions of pixels per second. Pixel rate is calculated by multiplying the amount of colour ROPs by the the card's clock speed. ROPs (Raster Operations Pipelines - also sometimes called Render Output Units) are responsible for drawing the pixels (image) on the screen. The actual pixel rate also depends on quite a few other factors, especially the memory bandwidth of the card - the lower the memory bandwidth is, the lower the ability to get to the maximum fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
One Response to “GeForce 9800 GT 1GB vs GeForce 9800 GX2”asus 9800 gx2 is a very handy gpu,it runs every game smoothly