Compare any two graphics cards:
Radeon R9 M375 vs Radeon RX 5700 XT 50th Anniversary Edition
IntroThe Radeon R9 M375 has a clock speed of 1015 MHz and a DDR3 memory speed of 1100 MHz. It also makes use of a 128-bit memory bus, and uses a 28 nm design. It is made up of 640 SPUs, 40 TAUs, and 16 Raster Operation Units.Compare those specifications to the Radeon RX 5700 XT 50th Anniversary Edition, which has GPU core speed of 1680 MHz, and 8096 MB of GDDR6 memory running at 1750 MHz through a 256-bit bus. It also is comprised of 2560 Stream Processors, 160 TAUs, and 64 ROPs.
Display Graphs
Power Usage and Theoretical BenchmarksMemory BandwidthThe Radeon RX 5700 XT 50th Anniversary Edition, in theory, should perform quite a bit faster than the Radeon R9 M375 in general. (explain)
Texel RateThe Radeon RX 5700 XT 50th Anniversary Edition is much (about 562%) better at AF than the Radeon R9 M375. (explain)
Pixel RateIf running with high levels of AA is important to you, then the Radeon RX 5700 XT 50th Anniversary Edition is the winner, and very much so. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Bandwidth is the max amount of data (counted in MB per second) that can be moved over the external memory interface within a second. It's worked out by multiplying the card's interface width by its memory speed. If the card has DDR type memory, it should be multiplied by 2 once again. If DDR5, multiply by ANOTHER 2x. The better the card's memory bandwidth, the faster the card will be in general. It especially helps with AA, HDR and higher screen resolutions. Texel Rate: Texel rate is the maximum amount of texture map elements (texels) that can be applied in one second. This figure is worked out by multiplying the total number of texture units of the card by the core clock speed of the chip. The better the texel rate, the better the video card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels applied per second. Pixel Rate: Pixel rate is the maximum amount of pixels that the graphics card could possibly record to the local memory in one second - measured in millions of pixels per second. The number is calculated by multiplying the amount of Raster Operations Pipelines by the the card's clock speed. ROPs (Raster Operations Pipelines - also called Render Output Units) are responsible for filling the screen with pixels (the image). The actual pixel output rate also depends on many other factors, most notably the memory bandwidth of the card - the lower the memory bandwidth is, the lower the potential to reach the max fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!