Radeon HD 6450 (OEM) 1GB vs Radeon RX 470

Intro

Compare all that to the Radeon RX 470, which uses a 14 nm design. AMD has clocked the core frequency at 926 MHz. The GDDR5 RAM runs at a frequency of 1650 MHz on this model. It features 2048 SPUs along with 128 Texture Address Units and 32 Rasterization Operator Units.

Display Graphs

Hide Graphs

Power Usage and Theoretical Benchmarks

Power Consumption (Max TDP)

Radeon HD 6450 (OEM) 1GB		31 Watts
Radeon RX 470		120 Watts
	Difference: 89 Watts (287%)

Memory Bandwidth

The Radeon RX 470 should theoretically perform a lot faster than the Radeon HD 6450 (OEM) 1GB overall. (explain)

Radeon RX 470		211200 MB/sec
Radeon HD 6450 (OEM) 1GB		28800 MB/sec
	Difference: 182400 (633%)

Texel Rate

The Radeon RX 470 will be much (more or less 1875%) more effective at AF than the Radeon HD 6450 (OEM) 1GB. (explain)

Radeon RX 470		118528 Mtexels/sec
Radeon HD 6450 (OEM) 1GB		6000 Mtexels/sec
	Difference: 112528 (1875%)

Pixel Rate

If running with a high screen resolution is important to you, then the Radeon RX 470 is a better choice, and very much so. (explain)

Radeon RX 470		29632 Mpixels/sec
Radeon HD 6450 (OEM) 1GB		3000 Mpixels/sec
	Difference: 26632 (888%)

Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit.

Price Comparison

Specifications

Memory Bandwidth: Memory bandwidth is the maximum amount of information (counted in MB per second) that can be moved over the external memory interface within a second. It is calculated by multiplying the card's bus width by the speed of its memory. In the case of DDR memory, the result should be multiplied by 2 once again. If it uses DDR5, multiply by ANOTHER 2x. The higher the card's memory bandwidth, the better the card will be in general. It especially helps with AA, High Dynamic Range and higher screen resolutions.

Texel Rate: Texel rate is the maximum number of texture map elements (texels) that can be applied per second. This is worked out by multiplying the total amount of texture units of the card by the core speed of the chip. The better the texel rate, the better the video card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels processed in a second.

Pixel Rate: Pixel rate is the maximum number of pixels the video card can possibly record to its local memory in one second - measured in millions of pixels per second. The figure is worked out by multiplying the number of Raster Operations Pipelines by the the core clock speed. ROPs (Raster Operations Pipelines - sometimes also referred to as Render Output Units) are responsible for drawing the pixels (image) on the screen. The actual pixel output rate is also dependant on lots of other factors, especially the memory bandwidth of the card - the lower the memory bandwidth is, the lower the ability to get to the max fill rate.