Submit Benchmarks!

Submit SSD Benchmark
Submit GPU Benchmark

Compare any two graphics cards:
VS

Radeon Pro Duo vs Radeon R9 Fury X

Intro

The Radeon Pro Duo comes with a GPU core clock speed of 1000 MHz, and the 4096 MB of HBM RAM is set to run at 500 MHz through a 4096-bit bus. It also is comprised of 4096 SPUs, 256 TAUs, and 64 ROPs.

Compare that to the Radeon R9 Fury X, which features core speeds of 1050 MHz on the GPU, and 500 MHz on the 4096 MB of HBM memory. It features 4096 SPUs as well as 256 TAUs and 64 ROPs.

Display Graphs

Hide Graphs

Benchmarks

These are real-world performance benchmarks that were submitted by Hardware Compare users. The scores seen here are the average of all benchmarks submitted for each respective test and hardware.

3DMark Fire Strike Graphics Score

Radeon Pro Duo 27167 points
Radeon R9 Fury X 14793 points
Difference: 12374 (84%)

Power Usage and Theoretical Benchmarks

Power Consumption (Max TDP)

Radeon R9 Fury X 275 Watts
Radeon Pro Duo 350 Watts
Difference: 75 Watts (27%)

Memory Bandwidth

The Radeon Pro Duo should theoretically perform a lot faster than the Radeon R9 Fury X overall. (explain)

Radeon Pro Duo 1024000 MB/sec
Radeon R9 Fury X 512000 MB/sec
Difference: 512000 (100%)

Texel Rate

The Radeon Pro Duo will be a lot (about 90%) faster with regards to AF than the Radeon R9 Fury X. (explain)

Radeon Pro Duo 512000 Mtexels/sec
Radeon R9 Fury X 268800 Mtexels/sec
Difference: 243200 (90%)

Pixel Rate

The Radeon Pro Duo will be much (about 90%) better at AA than the Radeon R9 Fury X, and also should be capable of handling higher screen resolutions without losing too much performance. (explain)

Radeon Pro Duo 128000 Mpixels/sec
Radeon R9 Fury X 67200 Mpixels/sec
Difference: 60800 (90%)

Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit.

One or more cards in this comparison are multi-core. This means that their bandwidth, texel and pixel rates are theoretically doubled - this does not mean the card will actually perform twice as fast, but only that it should in theory be able to. Actual game benchmarks will give a more accurate idea of what it's capable of.

Price Comparison

Display Prices

Hide Prices

Radeon Pro Duo

Amazon.com

Check prices at:

Radeon R9 Fury X

Amazon.com

Check prices at:

Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.

Specifications

Display Specifications

Hide Specifications

Model Radeon Pro Duo Radeon R9 Fury X
Manufacturer AMD AMD
Year April 2016 June 2015
Code Name Fiji XT Fiji XT
Memory 4096 MB (x2) 4096 MB
Core Speed 1000 MHz (x2) 1050 MHz
Memory Speed 500 MHz (x2) 500 MHz
Power (Max TDP) 350 watts 275 watts
Bandwidth 1024000 MB/sec 512000 MB/sec
Texel Rate 512000 Mtexels/sec 268800 Mtexels/sec
Pixel Rate 128000 Mpixels/sec 67200 Mpixels/sec
Unified Shaders 4096 (x2) 4096
Texture Mapping Units 256 (x2) 256
Render Output Units 64 (x2) 64
Bus Type HBM HBM
Bus Width 4096-bit (x2) 4096-bit
Fab Process 28 nm 28 nm
Transistors 8900 million 8900 million
Bus PCIe 3.0 x16 PCIe 3.0
DirectX Version DirectX 12.0 DirectX 12
OpenGL Version OpenGL 4.5 OpenGL 4.5

Memory Bandwidth: Bandwidth is the largest amount of information (measured in megabytes per second) that can be moved past the external memory interface in one second. The number is calculated by multiplying the card's bus width by its memory speed. If the card has DDR type RAM, it should be multiplied by 2 once again. If it uses DDR5, multiply by 4 instead. The better the memory bandwidth, the better the card will be in general. It especially helps with anti-aliasing, HDR and high resolutions.

Texel Rate: Texel rate is the maximum texture map elements (texels) that are applied per second. This figure is calculated by multiplying the total amount of texture units of the card by the core speed of the chip. The higher this number, the better the graphics card will be at texture filtering (anisotropic filtering - AF). It is measured in millions of texels applied in one second.

Pixel Rate: Pixel rate is the most pixels that the graphics card can possibly record to its local memory in a second - measured in millions of pixels per second. The figure is calculated by multiplying the amount of Raster Operations Pipelines by the clock speed of the card. ROPs (Raster Operations Pipelines - also sometimes called Render Output Units) are responsible for drawing the pixels (image) on the screen. The actual pixel rate is also dependant on quite a few other factors, most notably the memory bandwidth - the lower the bandwidth is, the lower the ability to reach the maximum fill rate.

Display Prices

Hide Prices

Radeon Pro Duo

Amazon.com

Check prices at:

Radeon R9 Fury X

Amazon.com

Check prices at:

Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.

Comments

Be the first to leave a comment!

Your email address will not be published. Required fields are marked *


*

WordPress Anti Spam by WP-SpamShield