Compare any two graphics cards:
Radeon HD 6450 (OEM) 1GB vs Radeon R9 380X
IntroThe Radeon HD 6450 (OEM) 1GB comes with a GPU core speed of 750 MHz, and the 1024 MB of GDDR5 memory is set to run at 900 MHz through a 64-bit bus. It also is made up of 160 Stream Processors, 8 Texture Address Units, and 4 Raster Operation Units.Compare those specs to the Radeon R9 380X, which comes with a core clock speed of 970 MHz and a GDDR5 memory speed of 1425 MHz. It also uses a 256-bit bus, and uses a 28 nm design. It features 2048 SPUs, 128 TAUs, and 32 Raster Operation Units.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthTheoretically speaking, the Radeon R9 380X should be a lot faster than the Radeon HD 6450 (OEM) 1GB overall. (explain)
Texel RateThe Radeon R9 380X will be a lot (more or less 1969%) faster with regards to anisotropic filtering than the Radeon HD 6450 (OEM) 1GB. (explain)
Pixel RateIf using lots of anti-aliasing is important to you, then the Radeon R9 380X is superior to the Radeon HD 6450 (OEM) 1GB, by far. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Bandwidth is the maximum amount of data (measured in MB per second) that can be transferred past the external memory interface in one second. It is worked out by multiplying the interface width by its memory speed. If it uses DDR memory, it must be multiplied by 2 again. If it uses DDR5, multiply by ANOTHER 2x. The higher the bandwidth is, the better the card will be in general. It especially helps with AA, High Dynamic Range and higher screen resolutions. Texel Rate: Texel rate is the maximum amount of texture map elements (texels) that can be processed in one second. This is calculated by multiplying the total texture units of the card by the core speed of the chip. The higher the texel rate, the better the card will be at texture filtering (anisotropic filtering - AF). It is measured in millions of texels processed in a second. Pixel Rate: Pixel rate is the maximum amount of pixels that the graphics card can possibly write to its local memory per second - measured in millions of pixels per second. The number is calculated by multiplying the number of Raster Operations Pipelines by the the core clock speed. ROPs (Raster Operations Pipelines - also sometimes called Render Output Units) are responsible for filling the screen with pixels (the image). The actual pixel output rate is also dependant on lots of other factors, most notably the memory bandwidth - the lower the bandwidth is, the lower the potential to get to the max fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!