Radeon HD 6770 1GB vs Radeon R9 M380

Intro

Compare all that to the Radeon R9 M380, which makes use of a 28 nm design. AMD has clocked the core speed at 1000 MHz. The GDDR5 memory runs at a speed of 1500 MHz on this particular card. It features 640 SPUs along with 40 Texture Address Units and 16 ROPs.

Display Graphs

Hide Graphs

Power Usage and Theoretical Benchmarks

Memory Bandwidth

In theory, the Radeon R9 M380 should perform a lot faster than the Radeon HD 6770 1GB in general. (explain)

Radeon R9 M380		96000 MB/sec
Radeon HD 6770 1GB		67200 MB/sec
	Difference: 28800 (43%)

Texel Rate

The Radeon R9 M380 is just a bit (about 11%) more effective at anisotropic filtering than the Radeon HD 6770 1GB. (explain)

Radeon R9 M380		40000 Mtexels/sec
Radeon HD 6770 1GB		36000 Mtexels/sec
	Difference: 4000 (11%)

Pixel Rate

The Radeon R9 M380 is just a bit (more or less 11%) more effective at FSAA than the Radeon HD 6770 1GB, and also will be capable of handling higher screen resolutions while still performing well. (explain)

Radeon R9 M380		16000 Mpixels/sec
Radeon HD 6770 1GB		14400 Mpixels/sec
	Difference: 1600 (11%)

Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit.

Price Comparison

Specifications

Memory Bandwidth: Memory bandwidth is the maximum amount of information (measured in MB per second) that can be transported over the external memory interface within a second. It is worked out by multiplying the card's interface width by its memory clock speed. If the card has DDR memory, it must be multiplied by 2 again. If it uses DDR5, multiply by 4 instead. The better the bandwidth is, the faster the card will be in general. It especially helps with anti-aliasing, High Dynamic Range and high resolutions.

Texel Rate: Texel rate is the maximum texture map elements (texels) that are processed in one second. This is calculated by multiplying the total texture units by the core clock speed of the chip. The higher this number, the better the graphics card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels applied in a second.

Pixel Rate: Pixel rate is the most pixels that the graphics card could possibly write to the local memory in a second - measured in millions of pixels per second. Pixel rate is calculated by multiplying the number of Render Output Units by the the core clock speed. ROPs (Raster Operations Pipelines - sometimes also referred to as Render Output Units) are responsible for outputting the pixels (image) to the screen. The actual pixel fill rate is also dependant on many other factors, most notably the memory bandwidth of the card - the lower the bandwidth is, the lower the potential to reach the maximum fill rate.