Compare any two graphics cards:
Radeon HD 6670 (OEM) vs Radeon R9 M380
IntroThe Radeon HD 6670 (OEM) has a clock frequency of 800 MHz and a GDDR5 memory speed of 1000 MHz. It also features a 128-bit memory bus, and makes use of a 40 nm design. It is comprised of 480 SPUs, 24 Texture Address Units, and 8 Raster Operation Units.Compare all of that to the Radeon R9 M380, which makes use of a 28 nm design. AMD has clocked the core speed at 1000 MHz. The GDDR5 RAM runs at a speed of 1500 MHz on this particular card. It features 640 SPUs as well as 40 Texture Address Units and 16 Rasterization Operator Units.
Display Graphs
Power Usage and Theoretical BenchmarksMemory BandwidthThe Radeon R9 M380, in theory, should perform quite a bit faster than the Radeon HD 6670 (OEM) overall. (explain)
Texel RateThe Radeon R9 M380 should be much (approximately 108%) more effective at texture filtering than the Radeon HD 6670 (OEM). (explain)
Pixel RateThe Radeon R9 M380 is much (approximately 150%) faster with regards to AA than the Radeon HD 6670 (OEM), and also able to handle higher screen resolutions without slowing down too much. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Memory bandwidth is the max amount of data (in units of megabytes per second) that can be moved past the external memory interface in a second. It is worked out by multiplying the interface width by its memory clock speed. In the case of DDR type memory, it should be multiplied by 2 again. If DDR5, multiply by 4 instead. The higher the bandwidth is, the faster the card will be in general. It especially helps with anti-aliasing, High Dynamic Range and higher screen resolutions. Texel Rate: Texel rate is the maximum texture map elements (texels) that are processed per second. This is worked out by multiplying the total amount of texture units of the card by the core clock speed of the chip. The higher this number, the better the card will be at texture filtering (anisotropic filtering - AF). It is measured in millions of texels applied in a second. Pixel Rate: Pixel rate is the maximum amount of pixels that the graphics chip can possibly write to its local memory in one second - measured in millions of pixels per second. The figure is calculated by multiplying the number of ROPs by the the core clock speed. ROPs (Raster Operations Pipelines - also called Render Output Units) are responsible for filling the screen with pixels (the image). The actual pixel rate also depends on quite a few other factors, especially the memory bandwidth of the card - the lower the bandwidth is, the lower the potential to get to the maximum fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!