Compare any two graphics cards:
Radeon HD 5450 vs Radeon R9 M375X
IntroThe Radeon HD 5450 uses a 40 nm design. AMD has set the core frequency at 650 MHz. The DDR3 RAM is set to run at a speed of 800 MHz on this specific card. It features 80(16x5) SPUs along with 8 TAUs and 4 ROPs.Compare those specifications to the Radeon R9 M375X, which features GPU core speed of 1015 MHz, and 4096 MB of GDDR5 memory set to run at 1125 MHz through a 128-bit bus. It also features 640 SPUs, 40 TAUs, and 16 Raster Operation Units.
Display Graphs
Power Usage and Theoretical BenchmarksMemory BandwidthTheoretically speaking, the Radeon R9 M375X should be much faster than the Radeon HD 5450 in general. (explain)
Texel RateThe Radeon R9 M375X is quite a bit (about 681%) more effective at texture filtering than the Radeon HD 5450. (explain)
Pixel RateThe Radeon R9 M375X is much (approximately 525%) more effective at full screen anti-aliasing than the Radeon HD 5450, and capable of handling higher resolutions while still performing well. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Memory bandwidth is the largest amount of information (counted in MB per second) that can be transferred across the external memory interface in one second. The number is calculated by multiplying the card's bus width by its memory clock speed. In the case of DDR type memory, the result should be multiplied by 2 once again. If DDR5, multiply by 4 instead. The better the memory bandwidth, the better the card will be in general. It especially helps with AA, HDR and higher screen resolutions. Texel Rate: Texel rate is the maximum amount of texture map elements (texels) that can be applied in one second. This number is calculated by multiplying the total number of texture units by the core speed of the chip. The better the texel rate, the better the video card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels applied in one second. Pixel Rate: Pixel rate is the maximum amount of pixels that the graphics card could possibly write to the local memory in a second - measured in millions of pixels per second. The number is calculated by multiplying the number of ROPs by the the core clock speed. ROPs (Raster Operations Pipelines - sometimes also referred to as Render Output Units) are responsible for filling the screen with pixels (the image). The actual pixel rate is also dependant on many other factors, most notably the memory bandwidth of the card - the lower the bandwidth is, the lower the ability to get to the max fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!