Compare any two graphics cards:
GeForce 8600 GT 512MB GDDR3 vs Radeon R9 M365X
IntroThe GeForce 8600 GT 512MB GDDR3 has core clock speeds of 540 MHz on the GPU, and 700 MHz on the 512 MB of GDDR3 memory. It features 32 SPUs along with 16 TAUs and 8 ROPs.Compare those specifications to the Radeon R9 M365X, which has GPU core speed of 925 MHz, and 4096 MB of GDDR5 RAM running at 1125 MHz through a 128-bit bus. It also is made up of 640 Stream Processors, 40 Texture Address Units, and 16 Raster Operation Units.
Display Graphs
Power Usage and Theoretical BenchmarksMemory BandwidthIn theory, the Radeon R9 M365X should perform quite a bit faster than the GeForce 8600 GT 512MB GDDR3 overall. (explain)
Texel RateThe Radeon R9 M365X is a lot (approximately 328%) faster with regards to texture filtering than the GeForce 8600 GT 512MB GDDR3. (explain)
Pixel RateIf running with a high resolution is important to you, then the Radeon R9 M365X is a better choice, by far. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Bandwidth is the max amount of data (measured in megabytes per second) that can be moved past the external memory interface within a second. It's calculated by multiplying the bus width by its memory speed. If it uses DDR memory, it must be multiplied by 2 again. If it uses DDR5, multiply by ANOTHER 2x. The better the bandwidth is, the better the card will be in general. It especially helps with anti-aliasing, HDR and high resolutions. Texel Rate: Texel rate is the maximum texture map elements (texels) that can be processed per second. This is calculated by multiplying the total number of texture units of the card by the core clock speed of the chip. The better this number, the better the video card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels applied in one second. Pixel Rate: Pixel rate is the maximum amount of pixels that the graphics chip could possibly write to the local memory in one second - measured in millions of pixels per second. The number is worked out by multiplying the amount of Raster Operations Pipelines by the the card's clock speed. ROPs (Raster Operations Pipelines - aka Render Output Units) are responsible for drawing the pixels (image) on the screen. The actual pixel fill rate also depends on lots of other factors, most notably the memory bandwidth - the lower the bandwidth is, the lower the ability to get to the maximum fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!