Compare any two graphics cards:
Radeon HD 4750 vs Radeon R9 M275X
IntroThe Radeon HD 4750 uses a 40 nm design. AMD has clocked the core frequency at 730 MHz. The GDDR5 memory works at a frequency of 800 MHz on this particular card. It features 640(128x5) SPUs as well as 32 TAUs and 16 Rasterization Operator Units.Compare those specs to the Radeon R9 M275X, which features GPU clock speed of 900 MHz, and 2048 MB of GDDR5 RAM running at 1125 MHz through a 128-bit bus. It also is made up of 640 Stream Processors, 40 TAUs, and 16 Raster Operation Units.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthAs far as performance goes, the Radeon R9 M275X should in theory be quite a bit superior to the Radeon HD 4750 in general. (explain)
Texel RateThe Radeon R9 M275X is much (more or less 54%) more effective at texture filtering than the Radeon HD 4750. (explain)
Pixel RateIf running with a high screen resolution is important to you, then the Radeon R9 M275X is superior to the Radeon HD 4750, by far. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Bandwidth is the largest amount of data (in units of MB per second) that can be transported over the external memory interface in one second. The number is calculated by multiplying the card's bus width by its memory clock speed. In the case of DDR type memory, it should be multiplied by 2 once again. If it uses DDR5, multiply by ANOTHER 2x. The better the bandwidth is, the better the card will be in general. It especially helps with anti-aliasing, High Dynamic Range and high resolutions. Texel Rate: Texel rate is the maximum amount of texture map elements (texels) that are processed in one second. This figure is worked out by multiplying the total texture units of the card by the core speed of the chip. The better this number, the better the graphics card will be at texture filtering (anisotropic filtering - AF). It is measured in millions of texels processed in one second. Pixel Rate: Pixel rate is the most pixels that the graphics card could possibly record to the local memory per second - measured in millions of pixels per second. The number is calculated by multiplying the number of colour ROPs by the the core speed of the card. ROPs (Raster Operations Pipelines - aka Render Output Units) are responsible for outputting the pixels (image) to the screen. The actual pixel output rate also depends on lots of other factors, especially the memory bandwidth - the lower the bandwidth is, the lower the ability to reach the maximum fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!