Compare any two graphics cards:
Radeon HD 7750 vs Radeon R9 M275X
IntroThe Radeon HD 7750 has a core clock frequency of 800 MHz and a GDDR5 memory speed of 1125 MHz. It also features a 128-bit bus, and makes use of a 28 nm design. It features 512 SPUs, 32 TAUs, and 16 Raster Operation Units.Compare those specs to the Radeon R9 M275X, which comes with core speeds of 900 MHz on the GPU, and 1125 MHz on the 2048 MB of GDDR5 memory. It features 640 SPUs along with 40 TAUs and 16 ROPs.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthBoth cards have the exact same bandwidth, so theoretically they should have identical performance. (explain)
Texel RateThe Radeon R9 M275X will be a lot (approximately 41%) more effective at anisotropic filtering than the Radeon HD 7750. (explain)
Pixel RateIf running with a high resolution is important to you, then the Radeon R9 M275X is the winner, but only just. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Memory bandwidth is the largest amount of data (counted in megabytes per second) that can be transported across the external memory interface in one second. It is worked out by multiplying the card's interface width by its memory speed. In the case of DDR type memory, it must be multiplied by 2 once again. If DDR5, multiply by ANOTHER 2x. The better the memory bandwidth, the better the card will be in general. It especially helps with anti-aliasing, HDR and higher screen resolutions. Texel Rate: Texel rate is the maximum amount of texture map elements (texels) that can be processed in one second. This figure is worked out by multiplying the total amount of texture units of the card by the core speed of the chip. The better the texel rate, the better the graphics card will be at texture filtering (anisotropic filtering - AF). It is measured in millions of texels processed in a second. Pixel Rate: Pixel rate is the maximum amount of pixels the graphics card could possibly record to its local memory per second - measured in millions of pixels per second. The number is worked out by multiplying the amount of Render Output Units by the the core speed of the card. ROPs (Raster Operations Pipelines - also sometimes called Render Output Units) are responsible for drawing the pixels (image) on the screen. The actual pixel rate is also dependant on lots of other factors, most notably the memory bandwidth of the card - the lower the bandwidth is, the lower the potential to reach the max fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!