Compare any two graphics cards:
GeForce GTS 250 1GB vs Radeon HD 3650 512MB
IntroThe GeForce GTS 250 1GB features a clock frequency of 738 MHz and a GDDR3 memory frequency of 1100 MHz. It also makes use of a 256-bit memory bus, and uses a 65/55 nm design. It is comprised of 128 SPUs, 64 TAUs, and 16 Raster Operation Units.Compare all that to the Radeon HD 3650 512MB, which comes with clock speeds of 725 MHz on the GPU, and 800 MHz on the 512 MB of GDDR3 RAM. It features 120(24x5) SPUs along with 8 Texture Address Units and 4 ROPs.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthTheoretically speaking, the GeForce GTS 250 1GB should be 175% faster than the Radeon HD 3650 512MB in general, due to its greater bandwidth. (explain)
Texel RateThe GeForce GTS 250 1GB should be much (approximately 714%) better at AF than the Radeon HD 3650 512MB. (explain)
Pixel RateThe GeForce GTS 250 1GB is much (about 307%) faster with regards to AA than the Radeon HD 3650 512MB, and also will be able to handle higher resolutions while still performing well. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Memory bandwidth is the max amount of data (in units of MB per second) that can be transferred past the external memory interface in a second. It's worked out by multiplying the bus width by its memory clock speed. If the card has DDR RAM, it must be multiplied by 2 again. If DDR5, multiply by ANOTHER 2x. The better the bandwidth is, the faster the card will be in general. It especially helps with AA, High Dynamic Range and higher screen resolutions. Texel Rate: Texel rate is the maximum amount of texture map elements (texels) that can be applied in one second. This is worked out by multiplying the total texture units by the core speed of the chip. The higher this number, the better the video card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels processed in one second. Pixel Rate: Pixel rate is the maximum amount of pixels that the graphics card could possibly record to its local memory in a second - measured in millions of pixels per second. The number is worked out by multiplying the amount of Raster Operations Pipelines by the clock speed of the card. ROPs (Raster Operations Pipelines - also called Render Output Units) are responsible for outputting the pixels (image) to the screen. The actual pixel rate also depends on many other factors, especially the memory bandwidth - the lower the memory bandwidth is, the lower the ability to reach the max fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!