Compare any two graphics cards:
GeForce GT 430 (OEM) vs Radeon R9 380 2G
IntroThe GeForce GT 430 (OEM) features a clock frequency of 700 MHz and a GDDR3 memory frequency of 900 MHz. It also makes use of a 128-bit memory bus, and uses a 40 nm design. It is made up of 96 SPUs, 16 TAUs, and 4 Raster Operation Units.Compare all of that to the Radeon R9 380 2G, which comes with a core clock speed of 970 MHz and a GDDR5 memory speed of 1425 MHz. It also uses a 256-bit bus, and uses a 28 nm design. It is made up of 1792 SPUs, 112 Texture Address Units, and 32 Raster Operation Units.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthTheoretically speaking, the Radeon R9 380 2G will be 533% faster than the GeForce GT 430 (OEM) in general, due to its higher bandwidth. (explain)
Texel RateThe Radeon R9 380 2G will be quite a bit (more or less 870%) better at anisotropic filtering than the GeForce GT 430 (OEM). (explain)
Pixel RateIf using a high screen resolution is important to you, then the Radeon R9 380 2G is a better choice, by a large margin. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Memory bandwidth is the largest amount of data (measured in megabytes per second) that can be transferred across the external memory interface within a second. The number is calculated by multiplying the bus width by the speed of its memory. If it uses DDR type memory, the result should be multiplied by 2 once again. If DDR5, multiply by 4 instead. The higher the card's memory bandwidth, the better the card will be in general. It especially helps with anti-aliasing, HDR and high resolutions. Texel Rate: Texel rate is the maximum amount of texture map elements (texels) that can be processed in one second. This is calculated by multiplying the total number of texture units of the card by the core speed of the chip. The higher the texel rate, the better the graphics card will be at texture filtering (anisotropic filtering - AF). It is measured in millions of texels per second. Pixel Rate: Pixel rate is the most pixels that the graphics chip can possibly write to its local memory per second - measured in millions of pixels per second. The figure is calculated by multiplying the number of Raster Operations Pipelines by the the core clock speed. ROPs (Raster Operations Pipelines - also sometimes called Render Output Units) are responsible for filling the screen with pixels (the image). The actual pixel output rate is also dependant on lots of other factors, especially the memory bandwidth of the card - the lower the bandwidth is, the lower the ability to reach the maximum fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!