Compare any two graphics cards:
GeForce GTX Titan X vs Radeon HD 6950 2GB
IntroThe GeForce GTX Titan X features a GPU core speed of 1000 MHz, and the 12288 MB of GDDR5 RAM is set to run at 1750 MHz through a 384-bit bus. It also is comprised of 3072 SPUs, 192 Texture Address Units, and 96 ROPs.Compare that to the Radeon HD 6950 2GB, which has clock speeds of 800 MHz on the GPU, and 1250 MHz on the 2048 MB of GDDR5 memory. It features 1408 SPUs as well as 88 Texture Address Units and 32 Rasterization Operator Units.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthAs far as performance goes, the GeForce GTX Titan X should in theory be a lot better than the Radeon HD 6950 2GB overall. (explain)
Texel RateThe GeForce GTX Titan X is much (about 173%) more effective at AF than the Radeon HD 6950 2GB. (explain)
Pixel RateIf using a high resolution is important to you, then the GeForce GTX Titan X is superior to the Radeon HD 6950 2GB, and very much so. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Bandwidth is the maximum amount of information (measured in MB per second) that can be transported over the external memory interface in a second. It's worked out by multiplying the interface width by its memory speed. In the case of DDR memory, it must be multiplied by 2 once again. If it uses DDR5, multiply by ANOTHER 2x. The higher the card's memory bandwidth, the faster the card will be in general. It especially helps with anti-aliasing, HDR and higher screen resolutions. Texel Rate: Texel rate is the maximum number of texture map elements (texels) that can be applied per second. This is calculated by multiplying the total number of texture units by the core clock speed of the chip. The better this number, the better the card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels applied in one second. Pixel Rate: Pixel rate is the maximum amount of pixels the video card can possibly write to the local memory per second - measured in millions of pixels per second. Pixel rate is calculated by multiplying the number of colour ROPs by the the core speed of the card. ROPs (Raster Operations Pipelines - also called Render Output Units) are responsible for drawing the pixels (image) on the screen. The actual pixel fill rate also depends on lots of other factors, most notably the memory bandwidth - the lower the memory bandwidth is, the lower the ability to reach the maximum fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!