Compare any two graphics cards:
GeForce GTX Titan X vs Radeon HD 7950 3GB
IntroThe GeForce GTX Titan X features a GPU core clock speed of 1000 MHz, and the 12288 MB of GDDR5 memory is set to run at 1750 MHz through a 384-bit bus. It also features 3072 Stream Processors, 192 Texture Address Units, and 96 Raster Operation Units.Compare that to the Radeon HD 7950 3GB, which comes with a core clock frequency of 800 MHz and a GDDR5 memory speed of 1250 MHz. It also features a 384-bit memory bus, and makes use of a 28 nm design. It is comprised of 1792 SPUs, 112 Texture Address Units, and 32 Raster Operation Units.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthThe GeForce GTX Titan X should theoretically perform much faster than the Radeon HD 7950 3GB overall. (explain)
Texel RateThe GeForce GTX Titan X will be a lot (more or less 114%) more effective at anisotropic filtering than the Radeon HD 7950 3GB. (explain)
Pixel RateIf running with high levels of AA is important to you, then the GeForce GTX Titan X is a better choice, and very much so. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Memory bandwidth is the max amount of information (counted in megabytes per second) that can be moved past the external memory interface within a second. It is worked out by multiplying the card's bus width by its memory clock speed. If the card has DDR memory, it must be multiplied by 2 again. If DDR5, multiply by ANOTHER 2x. The higher the bandwidth is, the better the card will be in general. It especially helps with AA, HDR and high resolutions. Texel Rate: Texel rate is the maximum number of texture map elements (texels) that are processed per second. This number is worked out by multiplying the total number of texture units by the core clock speed of the chip. The higher the texel rate, the better the graphics card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels processed per second. Pixel Rate: Pixel rate is the maximum amount of pixels the video card can possibly record to the local memory per second - measured in millions of pixels per second. Pixel rate is calculated by multiplying the amount of Raster Operations Pipelines by the the core clock speed. ROPs (Raster Operations Pipelines - also called Render Output Units) are responsible for filling the screen with pixels (the image). The actual pixel output rate is also dependant on lots of other factors, most notably the memory bandwidth of the card - the lower the bandwidth is, the lower the ability to get to the max fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!