Compare any two graphics cards:
VS

GeForce GTX 980 vs GeForce GTX Titan X

Intro

The GeForce GTX 980 uses a 28 nm design. nVidia has clocked the core speed at 1126 MHz. The GDDR5 memory works at a speed of 1750 MHz on this specific card. It features 2048 SPUs as well as 128 TAUs and 64 ROPs.

Compare those specifications to the GeForce GTX Titan X, which comes with core clock speeds of 1000 MHz on the GPU, and 1750 MHz on the 12288 MB of GDDR5 memory. It features 3072 SPUs along with 192 Texture Address Units and 96 ROPs.

Display Graphs

Hide Graphs

Benchmarks

These are real-world performance benchmarks that were submitted by Hardware Compare users. The scores seen here are the average of all benchmarks submitted for each respective test and hardware.

3DMark Fire Strike Graphics Score

GeForce GTX Titan X 17879 points
GeForce GTX 980 13552 points
Difference: 4327 (32%)

Grand Theft Auto V | 1920x1080 | Very High

GeForce GTX Titan X 82 FPS
GeForce GTX 980 63 FPS
Difference: 19 (30%)

Power Usage and Theoretical Benchmarks

Power Consumption (Max TDP)

GeForce GTX 980 165 Watts
GeForce GTX Titan X 250 Watts
Difference: 85 Watts (52%)

Memory Bandwidth

Theoretically, the GeForce GTX Titan X should perform a lot faster than the GeForce GTX 980 overall. (explain)

GeForce GTX Titan X 336000 MB/sec
GeForce GTX 980 224000 MB/sec
Difference: 112000 (50%)

Texel Rate

The GeForce GTX Titan X is quite a bit (more or less 33%) faster with regards to anisotropic filtering than the GeForce GTX 980. (explain)

GeForce GTX Titan X 192000 Mtexels/sec
GeForce GTX 980 144128 Mtexels/sec
Difference: 47872 (33%)

Pixel Rate

The GeForce GTX Titan X should be a lot (approximately 33%) more effective at full screen anti-aliasing than the GeForce GTX 980, and will be capable of handling higher resolutions more effectively. (explain)

GeForce GTX Titan X 96000 Mpixels/sec
GeForce GTX 980 72064 Mpixels/sec
Difference: 23936 (33%)

Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit.

Price Comparison

Display Prices

Hide Prices

GeForce GTX 980

Amazon.com

Check prices at:

GeForce GTX Titan X

Amazon.com

Check prices at:

Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.

Specifications

Display Specifications

Hide Specifications

Model GeForce GTX 980 GeForce GTX Titan X
Manufacturer nVidia nVidia
Year September 2014 March 2015
Code Name GM204-400 GM200
Memory 4096 MB 12288 MB
Core Speed 1126 MHz 1000 MHz
Memory Speed 7000 MHz 7000 MHz
Power (Max TDP) 165 watts 250 watts
Bandwidth 224000 MB/sec 336000 MB/sec
Texel Rate 144128 Mtexels/sec 192000 Mtexels/sec
Pixel Rate 72064 Mpixels/sec 96000 Mpixels/sec
Unified Shaders 2048 3072
Texture Mapping Units 128 192
Render Output Units 64 96
Bus Type GDDR5 GDDR5
Bus Width 256-bit 384-bit
Fab Process 28 nm 28 nm
Transistors 5200 million 8000 million
Bus PCIe 3.0 x16 PCIe 3.0 x16
DirectX Version DirectX 11.2 DirectX 12.0
OpenGL Version OpenGL 4.5 OpenGL 4.5

Memory Bandwidth: Memory bandwidth is the largest amount of information (measured in MB per second) that can be transferred over the external memory interface in one second. It is calculated by multiplying the card's interface width by its memory speed. In the case of DDR type RAM, the result should be multiplied by 2 again. If DDR5, multiply by 4 instead. The higher the card's memory bandwidth, the faster the card will be in general. It especially helps with AA, High Dynamic Range and higher screen resolutions.

Texel Rate: Texel rate is the maximum texture map elements (texels) that are applied in one second. This number is worked out by multiplying the total amount of texture units of the card by the core speed of the chip. The better the texel rate, the better the video card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels processed in a second.

Pixel Rate: Pixel rate is the most pixels the video card can possibly record to the local memory in one second - measured in millions of pixels per second. The number is calculated by multiplying the number of Render Output Units by the the core speed of the card. ROPs (Raster Operations Pipelines - also sometimes called Render Output Units) are responsible for drawing the pixels (image) on the screen. The actual pixel rate is also dependant on lots of other factors, especially the memory bandwidth of the card - the lower the memory bandwidth is, the lower the potential to reach the max fill rate.

Display Prices

Hide Prices

GeForce GTX 980

Amazon.com

Check prices at:

GeForce GTX Titan X

Amazon.com

Check prices at:

Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.

Comments

One Response to “GeForce GTX 980 vs GeForce GTX Titan X”
ada says:

Please include the number of transistors in the specs list.And some of cards are missing. Thanks

Your email address will not be published. Required fields are marked *


*

WordPress Anti Spam by WP-SpamShield