Radeon HD 7770 vs Radeon R7 250X

Intro

Compare those specs to the Radeon R7 250X, which features a clock frequency of 1000 MHz and a GDDR5 memory speed of 1125 MHz. It also features a 128-bit bus, and makes use of a 28 nm design. It is made up of 640 SPUs, 40 TAUs, and 16 Raster Operation Units.

Display Graphs

Hide Graphs

Benchmarks

These are real-world performance benchmarks that were submitted by Hardware Compare users. The scores seen here are the average of all benchmarks submitted for each respective test and hardware.

3DMark Fire Strike Graphics Score

Radeon HD 7770		3180 points
Radeon R7 250X		2860 points
	Difference: 320 (11%)

Power Usage and Theoretical Benchmarks

Power Consumption (Max TDP)

Radeon HD 7770		80 Watts
Radeon R7 250X		95 Watts
	Difference: 15 Watts (19%)

Memory Bandwidth

Both cards have the exact same bandwidth, so in theory they should have identical performance. (explain)

Texel Rate

Both cards have exactly the same texel rate, so theoretically they should perform equally good at at anisotropic filtering. (explain)

Pixel Rate

Both cards have the exact same pixel rate, so theoretically they should perform equally good at at anti-aliasing, and be able to handle the same resolutions. (explain)

Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit.

Price Comparison

Specifications

Memory Bandwidth: Bandwidth is the max amount of information (measured in MB per second) that can be transferred past the external memory interface in a second. It is worked out by multiplying the card's interface width by its memory clock speed. In the case of DDR type RAM, the result should be multiplied by 2 again. If DDR5, multiply by 4 instead. The higher the memory bandwidth, the better the card will be in general. It especially helps with AA, High Dynamic Range and high resolutions.

Texel Rate: Texel rate is the maximum number of texture map elements (texels) that can be applied in one second. This is calculated by multiplying the total texture units of the card by the core clock speed of the chip. The better this number, the better the video card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels applied in one second.

Pixel Rate: Pixel rate is the maximum number of pixels the graphics card can possibly record to its local memory in a second - measured in millions of pixels per second. Pixel rate is calculated by multiplying the number of Render Output Units by the clock speed of the card. ROPs (Raster Operations Pipelines - sometimes also referred to as Render Output Units) are responsible for drawing the pixels (image) on the screen. The actual pixel output rate is also dependant on lots of other factors, most notably the memory bandwidth - the lower the memory bandwidth is, the lower the ability to reach the max fill rate.