Compare any two graphics cards:
Radeon HD 3870 1GB vs Radeon R9 280X
IntroThe Radeon HD 3870 1GB features clock speeds of 775 MHz on the GPU, and 1125 MHz on the 1024 MB of GDDR4 memory. It features 320(64x5) SPUs along with 16 TAUs and 16 Rasterization Operator Units.Compare those specifications to the Radeon R9 280X, which features a core clock frequency of 850 MHz and a GDDR5 memory speed of 1500 MHz. It also uses a 384-bit bus, and makes use of a 28 nm design. It is made up of 2048 SPUs, 128 Texture Address Units, and 32 Raster Operation Units.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthTheoretically speaking, the Radeon R9 280X should perform much faster than the Radeon HD 3870 1GB in general. (explain)
Texel RateThe Radeon R9 280X should be a lot (approximately 777%) better at AF than the Radeon HD 3870 1GB. (explain)
Pixel RateThe Radeon R9 280X will be much (more or less 119%) more effective at FSAA than the Radeon HD 3870 1GB, and also will be capable of handling higher resolutions while still performing well. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Bandwidth is the max amount of data (counted in MB per second) that can be moved over the external memory interface in one second. It's worked out by multiplying the card's bus width by its memory speed. If the card has DDR RAM, it should be multiplied by 2 once again. If DDR5, multiply by ANOTHER 2x. The higher the card's memory bandwidth, the better the card will be in general. It especially helps with AA, High Dynamic Range and high resolutions. Texel Rate: Texel rate is the maximum texture map elements (texels) that are applied per second. This figure is calculated by multiplying the total amount of texture units by the core speed of the chip. The higher the texel rate, the better the card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels applied per second. Pixel Rate: Pixel rate is the most pixels the video card can possibly write to its local memory in a second - measured in millions of pixels per second. The number is calculated by multiplying the amount of Render Output Units by the the core clock speed. ROPs (Raster Operations Pipelines - sometimes also referred to as Render Output Units) are responsible for drawing the pixels (image) on the screen. The actual pixel output rate also depends on many other factors, most notably the memory bandwidth of the card - the lower the bandwidth is, the lower the ability to reach the maximum fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!