Compare any two graphics cards:
GeForce GT 640 DDR3 vs Radeon R9 280X
IntroThe GeForce GT 640 DDR3 has a GPU core clock speed of 900 MHz, and the 2048 MB of DDR3 RAM runs at 1782 MHz through a 128-bit bus. It also is comprised of 384 SPUs, 32 TAUs, and 16 ROPs.Compare all that to the Radeon R9 280X, which has a clock speed of 850 MHz and a GDDR5 memory speed of 1500 MHz. It also uses a 384-bit memory bus, and uses a 28 nm design. It features 2048 SPUs, 128 Texture Address Units, and 32 Raster Operation Units.
Display Graphs
BenchmarksThese are real-world performance benchmarks that were submitted by Hardware Compare users. The scores seen here are the average of all benchmarks submitted for each respective test and hardware.
3DMark Fire Strike Graphics Score
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthPerformance-wise, the Radeon R9 280X should in theory be quite a bit superior to the GeForce GT 640 DDR3 overall. (explain)
Texel RateThe Radeon R9 280X is quite a bit (about 278%) more effective at texture filtering than the GeForce GT 640 DDR3. (explain)
Pixel RateIf running with a high screen resolution is important to you, then the Radeon R9 280X is a better choice, by a large margin. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Memory bandwidth is the maximum amount of information (measured in MB per second) that can be transferred across the external memory interface within a second. The number is worked out by multiplying the card's interface width by its memory speed. If it uses DDR RAM, it should be multiplied by 2 again. If it uses DDR5, multiply by 4 instead. The better the bandwidth is, the better the card will be in general. It especially helps with anti-aliasing, High Dynamic Range and higher screen resolutions. Texel Rate: Texel rate is the maximum texture map elements (texels) that are applied per second. This number is calculated by multiplying the total texture units of the card by the core speed of the chip. The better this number, the better the card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels in a second. Pixel Rate: Pixel rate is the maximum amount of pixels that the graphics chip can possibly write to its local memory in a second - measured in millions of pixels per second. Pixel rate is worked out by multiplying the number of colour ROPs by the the core clock speed. ROPs (Raster Operations Pipelines - also sometimes called Render Output Units) are responsible for drawing the pixels (image) on the screen. The actual pixel fill rate also depends on quite a few other factors, especially the memory bandwidth of the card - the lower the memory bandwidth is, the lower the potential to reach the maximum fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!