Compare any two graphics cards:
VS

GeForce GTX Titan vs Geforce GTX 780

Intro

The GeForce GTX Titan makes use of a 28 nm design. nVidia has set the core frequency at 837 MHz. The GDDR5 memory is set to run at a speed of 1502 MHz on this particular model. It features 2688 SPUs as well as 224 Texture Address Units and 48 Rasterization Operator Units.

Compare those specifications to the Geforce GTX 780, which has a GPU core clock speed of 863 MHz, and 3072 MB of GDDR5 RAM set to run at 1502 MHz through a 384-bit bus. It also features 2304 Stream Processors, 192 Texture Address Units, and 48 Raster Operation Units.

Display Graphs

Hide Graphs

Benchmarks

These are real-world performance benchmarks that were submitted by Hardware Compare users. The scores seen here are the average of all benchmarks submitted for each respective test and hardware.

3DMark Fire Strike Graphics Score

GeForce GTX Titan 10162 points
Geforce GTX 780 10082 points
Difference: 80 (1%)

Grand Theft Auto V | 1920x1080 | Very High

GeForce GTX Titan 52 FPS
Geforce GTX 780 48 FPS
Difference: 4 (8%)

Power Usage and Theoretical Benchmarks

Both cards have the same power consumption.

Memory Bandwidth

Both cards have exactly the same bandwidth, so in theory they should have identical performance. (explain)

Texel Rate

The GeForce GTX Titan should be just a bit (approximately 13%) better at texture filtering than the Geforce GTX 780. (explain)

GeForce GTX Titan 187488 Mtexels/sec
Geforce GTX 780 165696 Mtexels/sec
Difference: 21792 (13%)

Pixel Rate

If running with a high screen resolution is important to you, then the Geforce GTX 780 is the winner, but it probably won't make a huge difference. (explain)

Geforce GTX 780 41424 Mpixels/sec
GeForce GTX Titan 40176 Mpixels/sec
Difference: 1248 (3%)

Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit.

Price Comparison

Display Prices

Hide Prices

GeForce GTX Titan

Amazon.com

Check prices at:

Geforce GTX 780

Amazon.com

Check prices at:

Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.

Specifications

Display Specifications

Hide Specifications

Model GeForce GTX Titan Geforce GTX 780
Manufacturer nVidia nVidia
Year February 2013 May 2013
Code Name GK110 GK110
Memory 6144 MB 3072 MB
Core Speed 837 MHz 863 MHz
Memory Speed 6008 MHz 6008 MHz
Power (Max TDP) 250 watts 250 watts
Bandwidth 288384 MB/sec 288384 MB/sec
Texel Rate 187488 Mtexels/sec 165696 Mtexels/sec
Pixel Rate 40176 Mpixels/sec 41424 Mpixels/sec
Unified Shaders 2688 2304
Texture Mapping Units 224 192
Render Output Units 48 48
Bus Type GDDR5 GDDR5
Bus Width 384-bit 384-bit
Fab Process 28 nm 28 nm
Transistors 7080 million 7080 million
Bus PCIe 3.0 x16 PCIe 3.0 x16
DirectX Version DirectX 11.0 DirectX 11.0
OpenGL Version OpenGL 4.3 OpenGL 4.3

Memory Bandwidth: Memory bandwidth is the largest amount of information (in units of megabytes per second) that can be transferred across the external memory interface within a second. It's calculated by multiplying the bus width by its memory clock speed. If it uses DDR RAM, the result should be multiplied by 2 again. If it uses DDR5, multiply by 4 instead. The better the card's memory bandwidth, the faster the card will be in general. It especially helps with AA, HDR and higher screen resolutions.

Texel Rate: Texel rate is the maximum texture map elements (texels) that are applied in one second. This figure is calculated by multiplying the total texture units of the card by the core clock speed of the chip. The better the texel rate, the better the card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels in one second.

Pixel Rate: Pixel rate is the maximum number of pixels that the graphics chip could possibly write to its local memory per second - measured in millions of pixels per second. The number is calculated by multiplying the number of Render Output Units by the clock speed of the card. ROPs (Raster Operations Pipelines - aka Render Output Units) are responsible for drawing the pixels (image) on the screen. The actual pixel fill rate also depends on many other factors, especially the memory bandwidth - the lower the memory bandwidth is, the lower the ability to reach the max fill rate.

Display Prices

Hide Prices

GeForce GTX Titan

Amazon.com

Check prices at:

Geforce GTX 780

Amazon.com

Check prices at:

Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.

Comments

4 Responses to “GeForce GTX Titan vs Geforce GTX 780”
Anonymous says:

yolo :] it's awesome

Animetakerfan says:

MY GTX 780 Phantom has:
GPU clock: 1079MHZ
Memory clock: 1652MHz
It´s a Titan killer

ali says:

I searching for the best vga to put it in my specs list for my lap?

NewGirlInTown says:

At almost half the price of the Titan and it can handle the best games the same? It's almost a no brainer.
Much better choice than even going with SLI OR Crossfire.
It's fast! Crisp clean visuals. Fast FPS. No lag due to your card.
As another commenter said, It's a Titan killer!

Your email address will not be published. Required fields are marked *


*

WordPress Anti Spam by WP-SpamShield