Compare any two graphics cards:
Radeon HD 5450 vs Radeon HD 7850
IntroThe Radeon HD 5450 has a core clock frequency of 650 MHz and a DDR3 memory speed of 800 MHz. It also features a 64-bit bus, and makes use of a 40 nm design. It is comprised of 80(16x5) SPUs, 8 TAUs, and 4 ROPs.Compare all of that to the Radeon HD 7850, which has GPU core speed of 860 MHz, and 2048 MB of GDDR5 memory set to run at 1200 MHz through a 256-bit bus. It also features 1024 SPUs, 64 TAUs, and 32 Raster Operation Units.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthPerformance-wise, the Radeon HD 7850 should in theory be much better than the Radeon HD 5450 in general. (explain)
Texel RateThe Radeon HD 7850 should be much (approximately 958%) better at texture filtering than the Radeon HD 5450. (explain)
Pixel RateIf running with a high screen resolution is important to you, then the Radeon HD 7850 is the winner, and very much so. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Bandwidth is the maximum amount of data (counted in MB per second) that can be transferred over the external memory interface in a second. It's calculated by multiplying the card's interface width by the speed of its memory. If the card has DDR type RAM, it must be multiplied by 2 once again. If it uses DDR5, multiply by ANOTHER 2x. The higher the card's memory bandwidth, the faster the card will be in general. It especially helps with AA, HDR and higher screen resolutions. Texel Rate: Texel rate is the maximum amount of texture map elements (texels) that can be applied in one second. This figure is worked out by multiplying the total texture units of the card by the core clock speed of the chip. The better this number, the better the graphics card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels applied in one second. Pixel Rate: Pixel rate is the maximum amount of pixels that the graphics card could possibly record to its local memory per second - measured in millions of pixels per second. The number is calculated by multiplying the number of ROPs by the clock speed of the card. ROPs (Raster Operations Pipelines - also sometimes called Render Output Units) are responsible for filling the screen with pixels (the image). The actual pixel rate also depends on quite a few other factors, most notably the memory bandwidth of the card - the lower the bandwidth is, the lower the potential to get to the max fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!