Compare any two graphics cards:
Radeon HD 4550 512MB vs Radeon HD 6450 (OEM) 1GB
IntroThe Radeon HD 4550 512MB has a core clock frequency of 600 MHz and a GDDR3 memory frequency of 800 MHz. It also uses a 64-bit bus, and makes use of a 55 nm design. It features 80(16x5) SPUs, 8 TAUs, and 4 ROPs.Compare all that to the Radeon HD 6450 (OEM) 1GB, which features core clock speeds of 750 MHz on the GPU, and 900 MHz on the 1024 MB of GDDR5 memory. It features 160 SPUs along with 8 Texture Address Units and 4 Rasterization Operator Units.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthPerformance-wise, the Radeon HD 6450 (OEM) 1GB should theoretically be much superior to the Radeon HD 4550 512MB overall. (explain)
Texel RateThe Radeon HD 6450 (OEM) 1GB is a lot (about 25%) more effective at texture filtering than the Radeon HD 4550 512MB. (explain)
Pixel RateIf using a high screen resolution is important to you, then the Radeon HD 6450 (OEM) 1GB is the winner, by a large margin. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Bandwidth is the maximum amount of data (in units of megabytes per second) that can be transferred over the external memory interface within a second. It is calculated by multiplying the bus width by its memory clock speed. In the case of DDR memory, it must be multiplied by 2 again. If DDR5, multiply by ANOTHER 2x. The higher the card's memory bandwidth, the faster the card will be in general. It especially helps with AA, High Dynamic Range and higher screen resolutions. Texel Rate: Texel rate is the maximum number of texture map elements (texels) that are processed in one second. This figure is calculated by multiplying the total amount of texture units by the core speed of the chip. The higher the texel rate, the better the graphics card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels processed in one second. Pixel Rate: Pixel rate is the most pixels the graphics card could possibly record to its local memory in one second - measured in millions of pixels per second. Pixel rate is worked out by multiplying the amount of colour ROPs by the the core speed of the card. ROPs (Raster Operations Pipelines - also called Render Output Units) are responsible for drawing the pixels (image) on the screen. The actual pixel rate also depends on many other factors, especially the memory bandwidth of the card - the lower the memory bandwidth is, the lower the ability to reach the max fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!